The official response asked the owner of M9 that the brakes failed to hit the wall and the ground was slippery, so the vehicle had no quality problems.

Recently, a new owner of the M9 car in Shangqiu revealed that his new car, which had been purchased for only half a month, suffered a suspected brake failure in the basement and the vehicle directly crashed into the wall. The accident video shows that the vehicle failed to stop in time when approaching the corner of the garage, violently hitting the front wall, and the headlight area was seriously damaged. The owner’s emergency braking was invalid, so he made a request to the media, hoping that the manufacturer could provide the driving data report of the vehicle.

This incident has caused extensive discussion on the Internet. Some netizens believe that the accident may be related to the excessive speed of the car, pointing out that most people are difficult to control under such a curve and speed. Some netizens reminded that on the wet epoxy floor, the speed should be kept extremely low, otherwise it is easy to brake.

In response, the 4S shop responded that the accident was caused by the slippery ground, not the failure of the vehicle brake system. The store displayed the driving data provided by the manufacturer, explained all the parameters in detail, and emphasized that the grip of the vehicle naturally weakened when the epoxy floor was wet and slippery, and the vehicle itself had no quality problems.

The official of the media also quickly replied in the relevant video comment area, and immediately went to the scene to assist in handling the accident. According to official analysis, at that time, the speed was as high as 36 km/h, and it began to brake at a distance of about 15 meters from the wall, and finally hit the wall at a speed of 15 km/h. The background data verify that the braking and steering systems of the vehicle are working normally, and the product defects are eliminated. At the same time, the official reminded that the slippery basement should follow the speed limit to avoid sudden braking and sharp turns.

It is worth noting that epoxy floor is widely used in underground garages because of its dust-proof, moisture-proof and easy to clean. However, when it meets water, it is easy to form a water film on its surface, which reduces the friction coefficient and becomes a common factor for vehicles to get out of control in rainy days or water accumulation.

The suggestion of safe driving points out that the speed should be controlled at a very low level on the epoxy ground with stagnant water to ensure sufficient braking distance and prevent accidents. In this accident, the driving speed of the owner far exceeded the recommended range, which significantly increased the risk.

In recent years, many accidents caused by high-speed driving and emergency braking on wet epoxy ground frequently occur, which highlights the importance of controlling vehicle speed under certain conditions.

As the flagship model of AITO automobile, Wenjie M9 was launched in December last year and positioned in the large SUV market, with the price range of 469,800 to 569,800 yuan. According to the latest sales data, this model sold 16,525 vehicles in June, and the cumulative sales in the first half of the year reached 58,823 vehicles.

Share industry information every day and build a bridge for autobots to communicate.